PlugiT FS

Fields of application
Highly fire retardant rubber (e.g. fire retardant, gas- and waterproof sealing of pipes)
Material
FS
Properties
Temperature range -30 °C / +120 °C;
pressure-tight up to 3 bar
Sizes
On request

Product Information

Properties
Horizontal and vertical installation
Easy installation
Wide range of applications
Noise-absorbing
Vibration-absorbing
Electrically non-conductive
High abrasion resistancet

Fields of application
Sealing of pipe and cable penetrations which are led through walls and ceilings.

Description
No special tools are required for quick and easy installation; the sealing plug is simply hammered into the annular space. The profiled design of the plug ensures a pressure tightness against gas and water up to 3 bar. Relevant test certificates are available. The sealing plugs are made of high-quality rubber and are extremely abrasion-resistant. Various rubber qualities are available for the different fields of application in industry and construction.

Notes
The plug can only be removed by hammering it out from the backside
Core drillings or casing pipe dimensions must be checked for a tolerance of <1mm before installation
Plug cannot be adjusted, a pipe support is mandatory

Technical Information

Use in a wall penetration
When using the seal in a core drilled hole which was made by means of a diamond drill bit, make sure that the surface is good and the concrete is of good quality.
The PlugiT sealing plug is driven from the outside of the wall into the annular space between the core hole and the carrier pipe respectively cable.r bzw. Kabel eingeschlagen.
The pressure load of 3 bar against gas and water is safely achieved. The use in a wall sleeve is also possible.